InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Precise synthesis of porphyrin array scaffolding polyisocyanides

Aryl isocyanides bearing free‐base and metallo‐porphyrins were prepared and polymerized with a Pd–Pt μ‐ethynediyl complex as the initiator to give polymers with narrow polydispersity indices. The molecular weights of the resulting polymers were precisely controlled by the initial feed ratio of the porphyrin monomer to the initiator. The UV–VIS spectra suggested that the porphyrin pendants are regularly arranged to form stacked columns. Metallo‐porphyrin polymers were also prepared by reacting free‐base porphyrin polymers with metal salts. The successive reactions of free‐base and zinc‐porphyrin monomers resulted in the formation of diblock polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 585–595, 2006     

Chiral discrimination of a helically organized crown ether array parallel to the helix axis of polyisocyanate

The asymmetric polymerization of 4′‐isocyanatobenzo‐18‐crown‐6 with the lithium amide of (S)‐(2‐methoxymethyl)pyrrolidine successfully proceeded to afford end‐functionalized poly(4′‐isocyanatobenzo‐18‐crown‐6) with (S)‐(2‐methoxymethyl)pyrrolidine (polymer 2 ). In the circular dichroism (CD) spectrum of 2 , a clear positive Cotton effect was observed in the range of 240–350 nm corresponding to the absorption of the polymer backbone, indicating that 2 partially formed a one‐handed helical structure, which was preserved by the chirality of (S)‐(2‐methoxymethyl)pyrrolidine bonding to the terminal end in 2 . In the titration experiments for the CD intensity of 2 in the presence of D ‐ and L ‐Phe·HClO₄ (where Phe is phenylalanine), a small but remarkable difference was observed in the amount of the chiral guest needed for saturation of the CD intensity and in the saturated CD intensity, indicating that the extremely stable, one‐handed helical part should exist in the main chain of 2 , which was not inverted even when the unfavorable chiral guest for the predominant helical sense, L ‐Phe·HClO₄, was added. In addition, helical polymer 2 exhibited a chiral discrimination ability toward racemic guests; that is, the guests were extracted from the aqueous phase into the organic phase with enantiomeric excess. The driving force of the chiral discrimination ability of 2 should certainly be attributed to the one‐handed helical structure in 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 325–334, 2006     

用正四棱锥形阵对声目标定位研究

文章结合声阵列在智能雷系统中的应用，提出了用立体五元声阵列对声目标进行定位，将智能雷中用于预警的传感器也参与到定位阵列中来，这样就在不增加传感器的条件下实现了市体阵列对声目标的定位。文章推导了定位公式和误差公式，并对结果进行仿真分析，与平面阵相比取得了较好的效果。不但提高了精度还降低了声阵列的盲区。     

锥体棱镜的加工

本文简单地叙述了锥体棱镜两种加工工艺。重点介绍直接成型法加工中对角度误差~1″的控制。并提出了角度超差零件返修时的光胶方法。     

Trace enrichment and HPLC analysis of polycyclic aromatic hydrocarbons in environmental samples,using solid phase extraction in connection with UV/VIS diode-array and fluorescence detection

Summary Both the separation of polycyclic aromatic hydrocarbons (PAH's) on tailor made HPLC phases, and their chromatographic enrichment and quantitative determination are of great interest. Because of the generally low concentrations of PAH's in the environment, and the low limiting values in German legislation for drinking water, methods for selective enrichment and sensitive detection are indispensable. On account of their relatively high amounts in soil, the determination of PAH's is valuable for the assessment of the potential danger to ground water by waste materials. These requirements can be fulfilled by used of solid phase extraction on enrichment columns, and fluorescence or UV/VIS diode array detection. For the detection of PAH's in the picogram range, the wavelengths for excitation and emission were time programmed over the chromatogram. With this feature, it is possible to detect all the individual compounds at the highest sensitivity, over the entire analysis.     

Efficiency of four different techniques in coupled HPLC-UV/VIS to quantify overlapping peaks with known spectral features

Summary Four different techniques to quantify unresolved chromatographic peaks with known spectral features combined with photodiode array detection, are investigated as regards their efficiency for the accurate and precise determination of drugs in the low g-range. The comparison includes peak suppression utilising difference chromatograms, first-order derivative chromatograms, selective chromatograms, generated by the calculation of orthogonal polynomial shares, and the powerful least-squares multicomponent analysis approach. Each of these methods uses UV-spectra taken throughout, the peak. The results presented and conclusions reached should enable the chromatographer to come to a decision about the reasonable use of these options now provided by multichannel detection in HPLC.     

CdSe纳米线阵列的制备及其表征(英)

通过在含有SeSO₃^2-和Cd²⁺的室温水溶液中，用模板-电沉积法在纳米孔阵列阳极氧化铝膜(AAM)模板中制备了高有序性的CdSe纳米线阵列，并对其形貌、结构和组分进行了表征。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明，纳米线阵列中的CdSe纳米线具有相同的长度和直径，分别对应于使用的AAM模板的厚度和孔径；X-射线衍射(XRD)和X-射线能谱(EDAX)结果表明，CdSe纳米线中Cd和Se的化学组成非常接近于1∶1，其结构为立方CdSe。另外，对模板-电沉积法制备CdSe纳米线的机理进行了讨论。